Water Scale Dissolving (By Descaler)
Water Scale Dissolving by Biodegradable Chemical Descaler
RYDLYME Biodegradable Descaler
RYDLYME biodegradable industrial chemical descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium- carbonate, calcium, mud, and rust from virtually any piece of water-based equipment. This biodegradable descaler is fortified with a complex formula of wetting and penetrating agents that dissolve into a solution for quick and easy disposal.
RYDLYME biodegradable descaler is as much as 12x faster than other chemical descalers, with most cleaning applications completed within a few hours. Unlike mechanical cleaning methods (e.g. brushing, rodding, hydro blasting), the RYDLYME descaler can be circulated through equipment or system without arduous and costly dismantling.
- Non-hazardous, non-corrosive, non-injurious, non-toxic, and fully biodegradable descaler is used to actually dissolve water scale, lime, mud, rust, and other water formed deposits from water operated equipment
- The temperature within the operating limits between 0° F / 18°C and 180°F / 82C and should be applied at ambient temperatures (50°F / 10° C and 75°F / 24°C) with full effectiveness and results obtainable
- The concentrated solution can be held safely in the open hand without deleterious effects.
- Does not corrode, erode, attack, oxidize or have other deleterious effects on virtually any metal or materials found in water systems such as:
COPPER FIBER LEATHER IRON BRASS PLASTIC
RUBBER STEEL STAINLESS TITANIUM GLASS CERAMIC
or other materials found in heat exchangers, vacuum pumps, evaporators, condensers, and/or other water-cooled, water heated, or water operated equipment when used as directed. Excepted magnesium, zinc, and/or aluminum, it could oxidize or pit when using 100% concentrated (non-diluted)
- The solution has a specific gravity of 1.045 and has a vaporization temperature of 213°F / 100°C. and does not have an open or closed cup flashpoint.
- The solution does not require neutralizers, as it is free rinsing with water.
Industrial Descaling Applications
Listed below are just some of the types of equipment that have been thoroughly cleaned with RYDLYME in the industry.
- Chillers & Condensers
- Heat Exchangers
- Heat Treating
- Pulp & Paper
- Tire & Rubber
- Vacuum Pumps
- Wastewater Facility
- Tankless Water Heater
Heat Exchanger Cleaning
- Heat Exchanger Descaler
Simply circulates RYDLYME through the heat exchanger tubes removing mineral and scale build-up in a safe and timely manner.
- Plate Exchanger Descaler
Cleaning allows equipment or systems to be cleaned without labor-intensive dismantling or removal.
Boiler Tube Cleaning
Boiler Tube Descaler
Boiler tube cleaning is made easy with RYDLYME Biodegradable Descaler due to the chemical’s unique attributes. As RYDLYME is circulated throughout the boiler system, the descaler will remove mineral deposits and clean boiler tubes of scale that dramatically increases your fuel consumption.
When the water scale is deposited on the heat transfer surfaces of an evaporative condenser, the cooling water from the spray heads cannot efficiently condense the refrigerant gas in the coils. As a result, inadequate cooling, overworked machinery, and expensive operation is incurred. This is when the RYDLYME condenser descaler is the perfect tool to remove the deposits.
Cooling Tower & Fin Fan Cleaning
Cooling Tower and Fin fan Descaler
RYDLYME is simply circulated through the cooling tower removing mineral and scale build-up in a safe and timely manner. Scaling within a cooling tower can restrict the water distribution of spray nozzles, reduce the water flow through the openings of a hot deck and restrict the airflow within the tower. All of these conditions will result in diminished cooling capacity and inefficient operation of the associated equipment on the cooling tower system.
- It is EFFECTIVE . . .
it dissolves approximately 1kg of scale per 4 liters
- It is NON-HAZARDOUS . . .
it does not fall under designated classes of hazardous waste
- It is BIODEGRADABLE . . .
it has a biochemical oxygen demand of 16 mg/l and can be disposed of through existing plant sewers
- It is SAFE . . .
it can be held in the open hand without injury
- It is NON-CORROSIVE…
it cannot be corrosive to equipment
- It is SPEED…
it is as much as 12x faster than other chemical descalers, with most cleaning applications completed within a few hours. Unlike mechanical cleaning methods (e.g. brushing, rodding, hydro blasting)
- It is APPROVED . . .
Worksafe, USDA, FDA, Kosher, U.S. Navy, NSF/ANSI standard 60-certified, ISO 9001 Certified Facility, and many others